Replacement Battery Pack

In order to keep your UV-Aid device at peak effectiveness we recommend replacing your batteries once every 5-6 months. The battery pack consists of 2 replacement batteries.

Instructions to replace batteries:

Remove the four Philips head screws located on the side of the label. 

Carefully pry the device apart with the half without the UV-Aid label facing down.

Remove the old set of batteries and replace with new set of batteries.  Make sure the short lead of the light source touches the + or positive end of the battery and long lead of the light source touches the - negative.

If the light stays on when reattaching UV-Aid, check to make sure the switch is on the off, or in the up position relative to the light source.